Tall valve covers
 

Does anyone know if you can install the tall valve covers on the 454 mag mpi with the factory exuast manifolds.Going to a 1.8 roller going to need the clearance. Thanks for any and all input.

Not positive but I would think the angled version of the tall covers would work.

I have 2 pair for sale if interested. I know they have enough height to clear your valve train w/ 1.8 ratio. They are freshly bead blasted and ready for paint/powdercoating of your choice, cheap.

Rick 847-874-2035

Both of them sound great if you guys could e-mail me with some prices at [email protected] I would like to get a set maybe two Ive got other engine projects and you can never have enough spare parts.

I put roller rockers on my 502 mag MPI. I ground off the tits on the inside of the stock valve covers and installed thick cork valve cover gaskets. Worked like a champ. Regardless you will have to grind the corner off of two of the rockers (one intake on each side) due to clearance issues with the valve cover stud boss'.