Offshoreonly.com - Bravo shift cables

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Bravo shift cables (https://www.offshoreonly.com/forums/general-q/152571-bravo-shift-cables.html)

awsomethunder

04-30-2007 02:28 PM

my cable makes a 90 degree bend into the bellhousing.is this normal?i would think it should be a strait shot

25 hors la loi

05-01-2007 06:32 AM

Quote:

Originally Posted by 25 hors la loi (Post 2111041)

Anyone have seen this kind of cable ...cause the manual i found ....the cable adjusment are not similar ....and do you have a step by step instruction ??? ...just to help me

hope i am clear ...and sorry for my poor english :rolleyes:

Somebody have some info to share ?? .....only two week ...before first turn Key :D
Thank`s to take time

txriverrat2001

05-01-2007 07:21 AM

Quote:

Originally Posted by 25 hors la loi (Post 2111843)

Somebody have some info to share ?? .....only two week ...before first turn Key :D
Thank`s to take time

That's a Morse 33C type cable with a Merc adapter. The cable in the pic is the one from the control box - the lower cable goes to the drive.

What's the problem?

25 hors la loi

05-01-2007 07:33 AM

Quote:

Originally Posted by txriverrat2001 (Post 2111887)

That's a Morse 33C type cable with a Merc adapter. The cable in the pic is the one from the control box - the lower cable goes to the drive.

What's the problem?

I have to adjuste it .....cause my drive have 2 to 3 seconde delay before engage ...and the manuel i found is not the same cable ...do you know how i have to adjust it ???
thank`s to take time ...and sorry for my poor english .... i am in the lurning curve :D

All times are GMT -5. The time now is 07:19 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page