|
525efi thermostat ????
1 Attachment(s)
Were is the thermostat in a 525efi motor? by this pick it doesent .or did someone put a plate over it? Curious
|
If you look at the bottom part of the intake manifold on the left hand side of your pic toward the bottom, it goes where the oval shaped plate is being held down by two bolts.
Larry 62 Bel-Air 409 260 Eagle XP HP500EFI 2002 Corvette M6 Coupe |
[QUOTE=Bubbletop409;2085559]If you look at the bottom part of the intake manifold on the left hand side of your pic toward the bottom, it goes where the oval shaped plate is being held down by two bolts.
but that looks like a block off plate, no water neck? |
[QUOTE=Strip Poker 388;2086083]
Originally Posted by Bubbletop409
(Post 2085559)
If you look at the bottom part of the intake manifold on the left hand side of your pic toward the bottom, it goes where the oval shaped plate is being held down by two bolts.
but that looks like a block off plate, no water neck? |
[QUOTE=TylerCrockett;2086126]
Originally Posted by Strip Poker 388
(Post 2086083)
Rob the 525's are closed cooled it is under the heat exchanger. |
[QUOTE=TylerCrockett;2086126]
Originally Posted by Strip Poker 388
(Post 2086083)
Rob the 525's are closed cooled it is under the heat exchanger. thanks:D |
Port side to be exact.
|
Originally Posted by Cam-shaft
(Post 2086326)
Port side to be exact.
I need a picture for a mental pick please:p |
| All times are GMT -5. The time now is 08:57 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.