Offshoreonly.com - 454 Mag rebuild

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - 454 Mag rebuild (https://www.offshoreonly.com/forums/general-q/157381-454-mag-rebuild.html)

czy40p

05-04-2007 08:17 AM

Darby,
If you post your location, we might be able to put you in touch with builder. I found out I have quite a few good builders in my area .
Jim

txriverrat2001

05-04-2007 08:26 AM

I've got two that just had complete rebuilds done - 4K each. That just to assemble a long block with tin. Still have the cost of R&R and rigging them back up.

speedchangesyou

05-04-2007 06:12 PM

Quote:

Originally Posted by czy40p (Post 2116415)

Darby,
If you post your location, we might be able to put you in touch with builder. I found out I have quite a few good builders in my area .
Jim

Jim, I live about 50 miles south of Pittsburgh, PA. Thanks Darby

articfriends

05-05-2007 12:15 AM

Quote:

Originally Posted by articfriends (Post 2116268)

I would have to agree with Jamie, good work isn't cheap nor are decent parts. Stay away from some of the fly by night guys who have outrageous dyno claims and obscure shop locations,there is nothing worse than paying someone to do something and than having to pay someone else to re-do correctly,this happpened to a fellow osoe'r, nordic95, Smitty

This post was in response to another post that seems to have just "poofed" into thin air:evilb: ,Smitty

LAKESIDE RESTORATIONS

05-05-2007 06:59 AM

If we can help let me know.. We are about an hour north of t he Poconos (the other side of the state from you).. :) Jamie / Lakeside

.

All times are GMT -5. The time now is 01:38 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page