Offshoreonly.com - Drive Pump Hose Fittings

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Drive Pump Hose Fittings (https://www.offshoreonly.com/forums/general-q/158369-drive-pump-hose-fittings.html)

offthefront

05-16-2007 04:40 AM

Drive Pump Hose Fittings

Anyone know where I can fittings for drive pump hoses ? They should be 1/4" inverted Flair .... Parker doesn't have them .. They put new ends on the Tab pump Hoses ...Those are 3/16 ...I could go to 3/16 for the drives but would rather have the 1/4" ....m

Jb-fse

05-17-2007 03:52 PM

Drive Pump Fittings

The Drive Pump Fittings Are #4 Inverted Flares
The Parker Hose To Use Is #919-4 With 16991n-4-4
Inverted Ends. We Sell These All The Time.

offthefront

05-17-2007 07:39 PM

Quote:

Originally Posted by Jb-fse (Post 2131451)

The Drive Pump Fittings Are #4 Inverted Flares
The Parker Hose To Use Is #919-4 With 16991n-4-4
Inverted Ends. We Sell These All The Time.

Thanks I'll check ... that 1/4" ? and SS ? ....m

offthefront

05-18-2007 08:37 AM

I checked those numbers and the hose is 3/16 id ..which I have no clue if it would make a difference ....and the fittings are not SS .. which I think would mater .. esp here in Fla ...m

All times are GMT -5. The time now is 10:30 AM.