Garmin Gps 2010c To Livorsi Gps Speedo
 

I Installed A Livorsi Speedo For My Back Seat And Want To Wire It Up To My Garmin 2010c Gps, Anyone Know How I Should Do This?

I have the Garmin 3210c and this is how mine worked:

The Garmin 3210 has a 4 National Marine Electronics Association (NMEA) ports. Port 4 ( is reserved for the antenna, port 3 is reserved for the sonar. Port 1 (pin 16/brown data in and pin 17/blue data out). Port 2 (pin 9/violet data in and pin 10/gray data out). You can use either of these ports to go to the input of your speedo. I have smartcraft and it was a blue/white input to the smartcraft system- not sure what wires your speedo has?

page 76: http://www8.garmin.com/manuals/41_OwnersManual.pdf

This has your unit
http://www8.garmin.com/manuals/47_20...stallation.pdf

http://www.livorsi.com/pdf/GPS%20DIGITAL.pdf

http://www.livorsi.com/pdf/GPS%20MONSTER.pdf

http://www.livorsi.com/pdf/GPS%20Instructions-ca.pdf

Thanks I'll Give It A Try Tommorow