Someone posted this link a while ago. Glad I saved it. http://www.burnsstainless.com/index.htm Sprague, where did you get those silicone connectors?

Tube Bender
 

We Can Bend 1-1/4 Ss Tube On Our Hyd Bender.we Did Some For The Airborn Marine Boat. Water Intakes.we Stock 1-1/4 Ss .120 Wall .the Max Bend Radius Is 3-3/4" Twice That If You Want 180* Bends.

I just bought silicone hose and cut it to length. I was slow to respond as we have been out of town.
I just searched on web for silicone hose. Let me know if you want more contact info: this supplier was nothing special.

I am a manager at a hyrdro shop I can bend all that stuff let me know what you need if I can help I will JOHN A-TECH hydralics

Fenderjack and Jb-fse , Sorry I'm late in responding.

What we need first is only 4 each, .120 x 1.25 OD, Tite 90* bend W/ Hose barbs on each end.

Thanks,LE

can i ask why you want 120 wall for water lines ? that is very very heavy... i made all the ones i had to make from . 040 ( might have been 032 ... can't remember but was thinwall exhaust bends less than 062) and cut and tig welded them as nec. weighed nothing at all ....

Good question, the .120 wall elbow will also see a light structural load.....Otherwise, .062 or maybe liter would be ideal.

If you know a electrician, They can bend the pipe for you. My bender will bend up to 2" smoothly and they make benders up to 5 ".