Trim up intermittent, trim down works, still clicks
 

Hello guys and gals! Great weather up here in Toronto so far!
My Bravo1 trims down fine, but takes 10-15 tries of hittin the up switch to make it work. There is a clicking in the hatch everytime I hit the switch? Haven't been in there yet, as its a pain ( I'm in a wheelchair). Was hoping for some direction so I can go in once with the right tools and parts.
Thanks in advance!

sounds as if you have a bad solenoid. also check the lil ground wire coming off the solenoid going to ground, as well as the large red jumper from the other solenoid.