Offshoreonly.com
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   mefi4b vs mefi 3 (https://www.offshoreonly.com/forums/general-q/162591-mefi4b-vs-mefi-3-a.html)

MEFIburn 07-17-2007 02:00 PM
Originally Posted by SB (Post 2195395)
If you don't mind me asking, where do the tables end for rpm on the MEFI 3 and MEFI 4 ?

Thanks again for all your very valuable info.

The tables end at 6000 rpm for the MEFI 3 and the first MEFI 4, and 9000 rpm for the MEFI 4A and MEFI 4B.

It is interesting to see the evolution of the MEFI controllers over time, from how relatively simple the MEFI 1 was, to the huge number of parameters in the MEFI 4B.
Bob


All times are GMT -5. The time now is 01:15 AM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.