Where to find a Bare Big block??
Where can I find a good BB 4 bolt at? under 60 over. Or should I just buy a new block??
Thanks Mike |
Where are you located. Try to buy one as local as possible, shipping can get very costly.
|
I have a salt water cooled block, 4-bold gen IV, original bore, 450 ish original hours.
Taco bell cheap - Cape Cod |
I am in Indiana but I have a trucking company so It is possible to find one cheap in other state's. Email me pics of the block [email protected]
Thanks Mike |
Try a google search of engine core's. I found mine in Chicago years ago. I'll try and find the ph#.
|
I have a friend who own a machine shop here in Maryland, he has 2 or 3 454 gen IV blocks std bore out of cars or trucks. He hot tanks, mags, pressure checks, line hones and taps all holes. He doesnt deck or bore and hone because he doesnt know what you have for pistons and what your combination is. I believe he gets $1500.00 a block. Just cant find a good non corroded block anymore.
John:D |
What is the cost of a new block?? It has been 10 years last time I bought a block and it was All Alum. for a race car
|
I found the place but they moved from Melrose Park to Kankakee. Hope this helps:
http://www.kbcores.com/Home |
Brand New Dart Big M blocks can be had for $2,000.
|
new 502 GM Blocks can be had for around 1700.00 from most good chevy dealerships.
Chris |
All times are GMT -5. The time now is 11:58 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.