|
Originally Posted by BenPerfected
(Post 2226020)
Here is another combination. We put the oil temp sender in the oil filter/thermo housing after cooling. We then have a separate high oil temp sender in the pan connected to a dash warning light mounted next to oil temp gauge (top left).
|
What size sender do I need on a 2000 7.4L MPI? 1/8", 1/4" or 3/8"?
I have decided to mount it at the filter bracket instead of at the pan. I can do it myself and I will not miss any time in the water. The mexhanics in this area usually run 7-10 days just to take a look at anything. I have decided to move remove the depth finder and replace it with the oil temp gauge. I'll leave extra wire in case I want to shift things around at a latter date and add the depth finder back in. |
One easy way to confirm the size is to pick up a pipe plug of each size at any hardware store...for maybe $2 you will know exactly what to order.
|
| All times are GMT -5. The time now is 06:55 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.