Seperator filter
 

I am going to change water seperator filter on twin 525 sc's. Any tricks or tips?

Don't smoke:cool-smiley-011:

:D :D

Refill the new ones about 3/4 of the way with fuel before you screw them on. It will save a lot of cranking time when you restart it.

My plan is to just unscrew it fill it 3/4 full of gas then reinstall new. Did I miss anything? Do I have to do anything to gasket? I know my buddy changed his a few months ago and had a problem with vapor lock. Anything I can do to avoid that from happening?

run motor's for awhile after change to get all the air out of the line :)

You speak from experience or what?:D :signs069:

Are you bringing that bomber on the water this weekend? I'll be in sebring on saturday but will be looking to be on the water Sun/Mon...

yes tuff guy i speak from experience :) learn from my mistake

i will be at the lake sylva raft up on sunday who's going to be there
:circle:

Make sure the old rubber gaskets come off with the old ones...check flanges with your finger...dab a little oil on the new ones and hand tighten...don't have to f with priming the new filter...it will purge instantly...have extinguisher near by for safety.