Offshoreonly.com - Need a Gen 6 502 block

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Need a Gen 6 502 block (https://www.offshoreonly.com/forums/general-q/169397-need-gen-6-502-block.html)

Smitty

09-23-2007 10:14 AM

Need a Gen 6 502 block

I need a gen 6 502 block. Any suggestions?? I would take a complete 502 Mag MPI motor or a 500 Hp EFI motor if the price was right.

JCPERF

09-23-2007 10:15 AM

Quote:

Originally Posted by Smitty (Post 2281435)

I need a gen 6 502 block. Any suggestions?? I would take a complete 502 Mag MPI motor or a 500 Hp EFI motor if the price was right.

I have one that is machined with a sleeve.I have another one that the deck has been milled .030

Smitty

09-23-2007 10:34 AM

JC,

I can sleeve what I have, but I don't want to do that since I run a blower. I am already .030 over with a bore of 4.500. How much would it raise my comp. ratio if the block is milled .030 ??

Thanks,
Smitty

JCPERF

09-23-2007 10:39 AM

Quote:

Originally Posted by Smitty (Post 2281461)

If you had 8.5 to 1, you would now have 8.8.

All times are GMT -5. The time now is 09:14 PM.