trim pump mount
 

I'd like to relocate my drive pumps up on the transom like my K plane pumps...get rid of the shelves on the floor for a cleaner look. Does anyone know of a good, clean looking transom mount bracket for the drive pump? It current has the angle bracket for the floor mount, but I don't like the looks of it. The K plane pumps have a nice bracket that seems to be the combination of rubber, sheetmetal piece and then an extruded bracket that slips into the rubber. I think that setup is neat and would like to get my hands on another pair or something similar. Thoughts?

Use the same mount as the other pumps have on them from Mercury. Part #846002, #846003 and #846001. Get the stainless bolts and washers at a hardware store.:D Thats the plate to mount the relays on and the brackets to mount it to the transom or bulkhead.

Where can I find a picture for the mercury bracket?

The billet one is out of my price range...I'll wittle one out of aluminum before paying that price!

http://www.mercruiserparts.com/Show_...%28846183A2%29

This should do it.:D All 3 pieces on your right. The bottom bracket bolts to the transom, the other bracket sandwiches the stainless plate to the trim pump and the unit slides down onto the first then a small bolt comes down from the top to hold the 2 brackets together.

cool deal
 

:cool-smiley-026:

And reasonably priced...sweet!! Thanks, precisely what I was looking for.

:ernaehrung004: