Need bottom injector o-ring/seal in a bad way
 

Guys - Gotta couple of 502 MPI's we're trying to get in this weekend - I need the bottom seal for the fuel injector on a 96 VST style 502 MPI. The Merc part number is 25-805511A 1 . Apparently my friend has misplaced one and my local distributor is out of them. They are in stock in Dallas - but Merc is not shipping anything overnight due to their wonderful upgrade to Oracle or some crap. If anyone has a good one or a new kit they could send me overnight UPS - I'd greatly appreciate it.

Please PM me or email me @ [email protected]


Thanks

Capt Ross

did you try Palmer power they may have it or can get it quickly.

there is nothing special about those o rings. any industrial supply house, or any marina w/ an orng assortment will have what you need off the shelf

you can go to any GM dealer and and get a injector seal kit

I went to a local NAPA auto parts store. The Kit # 2-12089 is a complete kit with every o-ring per injector you would need.

Old thread bump. I need to reseat my injectors too, does anyone know if 2-12089 is still the proper part # from Napa?

http://www.napaonline.com/Catalog/Ca...089_0374681231

..........