Offshoreonly.com - what size of blower do I need

Page 3 of 3

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - what size of blower do I need (https://www.offshoreonly.com/forums/general-q/170554-what-size-blower-do-i-need.html)

hoozeyurdaddy

10-11-2007 09:17 AM

Quote:

Originally Posted by Quent (Post 2302064)

Respectfully, I would say that your issue is not an engine question. Your issue will be a drive issue. Buy lots of new ones early and often.

Have a little faith in the old IMCO SC, 1000hp might stain it a bit, but I'm also runnig at 3600ft, so there is a little power loss due ti altitude.

hoozeyurdaddy

10-11-2007 09:32 AM

I am aware that 10.5:1 is to much, JE say's they can cut them down to 8.5:1 with no loss to the integrity of the piston.
I plan to talk to dean,he sent me a pm and said he could help out, as far as the fuel on powell, there are 2 places on the lake to get it, wauwepe to the south and halls crossing in the middle.
thanks for all the input guy's
what about carbs, 4500's or 4150's
twin 4500's seem like overkill for 6psi and 6000 rpm's

All times are GMT -5. The time now is 07:58 PM.

Page 3 of 3

Show 40 post(s) from this thread on one page