502 EFI injectors
 

A while back I started a thread about a miss in one of my 502 EFI motors and it was suggested that I have the injectors "tested" for spray pattern and also to "back flush" them. The guys that work on my motors normally tell me they have no way to do this "spray" test.

Can anyone tell me where I can send my injectors for this test ?

Thanks,

Marren
http://www.injector.com/

they did mine too!

Good people. t500hps is the one who turned me onto Marren. Thanks again! :cool:

I don't remember that but I glad it worked out. If someone treats me well I make a point to tell everyone I can.

http://www.lindertech.com/

Jim Linder is known in the trade as the Injector Guru.

It's been about 2 weeks, I almost forgot too. :p :D
http://www.offshoreonly.com/forums/s...d.php?t=172620

t500hps , I just sent my injectors to them , thanks again for the tip. How are your 540's running?

After chasing a problem in one motor that was created by bad injectors we have finally put about 30 un-interupted hours on the boat. (the bad injectors is what lead me to injector.com) The motors have been great and I usualy run 32's instead of 28's that come on the boat stock. I backed into the dock at a poker run and was immediately asked what was in the boat. I told the guy "they look like 500EFI's"...and he interupted me. "Well they don't SOUND like 500's!!" :ernaehrung004:

we do about 5-10 sets a week

a LOT of Merc stuff, especially outboards


Jim

305 592 7070
www.dpii.com