Offshoreonly.com - Water Dumps

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Water Dumps (https://www.offshoreonly.com/forums/general-q/173408-water-dumps.html)

nordic95

11-16-2007 06:16 PM

Water Dumps

1 Attachment(s)

Does any one know where I can get a water dump like this with the 45 degree angle but with a thread on #8 or #10 on the inside.I need it 3 inches long or so to make it thru the transome of my boat.

Thanks in advance

Nordic95

nocigarette

11-16-2007 06:45 PM

i dont think they make them........not sure.........Your best bet is buy it and take it to a welder and have him weld a an steel fitting to it......I have done that quite a bit on various plumbing issues i have had...

CIG3	11-16-2007 07:12 PM

Stainless Marine can hook you up.

ls1nova

11-17-2007 09:31 AM

Could you buy one of the one's that comes out straight, then use a 45* fitting.

Panther

11-17-2007 12:17 PM

Quote:

Originally Posted by ls1nova (Post 2338853)

Could you buy one of the one's that comes out straight, then use a 45* fitting.

My guess is yes! The small dumps I use for the rear of my intake manifold are threaded all the way thru the inside, as well as the outside with a -8 fitting I believe.

All times are GMT -5. The time now is 01:36 AM.