Offshoreonly.com - Mercruiser HP 500 supercharged ?

Page 3 of 3

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Mercruiser HP 500 supercharged ? (https://www.offshoreonly.com/forums/general-q/173884-mercruiser-hp-500-supercharged.html)

RBeyer

12-02-2007 03:49 PM

Quote:

Originally Posted by Jammin' (Post 2346622)

I'm putting small (M1) Prochargers on my 500HP's with HP525 cams. MSD ignition, IMCO exhaust and Cometic gaskets. 5 lbs boost or less. I had the Prochargers on hand and Procharger says they'll work.

Spend the extra $$$ and go with the M3SC you can still do 5PSI but the intercoolers are all the difference.

RBeyer

12-02-2007 03:52 PM

Quote:

Originally Posted by Sonic36 (Post 2348348)

500 hps do react well to supercharging, but I would be more worried about whats behind the engines at that point, stock bravo drives don't normally react well to superchargers LOL...and might I suggest replacing the factory oil coolers with some much larger ones :D

The drives will be disposable plan on an upgrade I would suggest B-Max. The most dependable bolt on for the money. My $.02.

Jammin'

12-02-2007 04:31 PM

I had the M1's sitting around in boxes with no apparent home for them. Otherwise, I probably wouldn't do it at all. The AW-162 intercoolers are quite small.

All times are GMT -5. The time now is 03:50 PM.

Page 3 of 3

Show 40 post(s) from this thread on one page