Offshoreonly.com - Gen 6 502

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Gen 6 502 (https://www.offshoreonly.com/forums/general-q/175046-gen-6-502-a.html)

baja27

12-10-2007 09:09 AM

Gen 6 502

Will a double roller timing chain fit under the stock cover?
Thanks

t500hps

12-10-2007 09:32 AM

My builder used a double chain Rollmaster in my 500EFI's and it would just tap the raised sections under the cover...we ground them down and 6 motors have been running fine like that for 1-2 years.

Young Performance

12-10-2007 10:42 AM

Yes, with a little modification. Like t500 said, you have to grind the raised ribs down to the level of the rest of the cover. Eddie

baja27

12-10-2007 11:08 AM

Grind down the inside or just the upper portion
Thanks

Young Performance

12-10-2007 11:46 AM

Just the upper portion where the cam gear is. You may have to test fit and grind a few times to get it all.

baja27

12-10-2007 12:07 PM

Thanks :drink:

All times are GMT -5. The time now is 02:04 PM.