Offshoreonly.com - fly wheels

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - fly wheels (https://www.offshoreonly.com/forums/general-q/177518-fly-wheels.html)

itbs	01-15-2008 11:26 AM

fly wheels

what fly wheel to use internal balence big block two peice rear seal bravo cuppler

KEPP	01-15-2008 04:34 PM

Flywheel

Dear itbs

Keith Eickert performance products can offer you a number of different flywheels but I would need to know a few things first. What generation is the engine? Is it a bellhousing mounted starter or engine block mounted starter? Would you like steel or a aluminum style flywheel? As you can see we have it all here. If you have any questions you can call me at (386)446-0660 or e-mail me at [email protected] .

Thanks

Tony

cougarman

01-15-2008 05:55 PM

3 Attachment(s)

I have a few used ones if your interested.

Jon

cougarman

01-15-2008 05:56 PM

1 Attachment(s)

Another Drive plate

Noise Pollution

01-15-2008 08:04 PM

Quote:

Originally Posted by itbs (Post 2407130)

what fly wheel to use internal balence big block two peice rear seal bravo cuppler

If you have your original, get it neutral balanced.

Young Performance

01-15-2008 10:50 PM

If it's a two piece seal than it is a Gen IV. The only flywheel you can get from GM that is neutral is for the 427That is the only internally balanced big block that GM produced. You can go aftermarket and get a cast iron flywheel from Pioneer.(part # FW100) or a steel one from Hays.(different part numbers for different weights) Hope this helps, Eddie.

Oh, by the way, I sell all of the above flywheels:D

All times are GMT -5. The time now is 09:39 AM.