![]() |
Trim Tab motor assy. ?
Are the Trim Tab complete motor/hyd's assy. and the Outdrive motor/hyd's trim motor assy. interchangeable ?
Meaning, can you use a Mercruiser outdrive trim motor complete set-up for K planes appl.? 2001 Mercruiser motor/hyd. assy for K-planes. Thank you for your replies ! |
|
I have the same question.. kinda, everythign I have seen tells me you can use them on either.
|
on a outdrive green wire is up...on tabs green wire is down...
|
I'm using them for my tabs. Open 72 is right, you have to reverse them, I just ran the hydraulic lines up to the down port on the tab. The only difference is that the drive pump runs the tabs REAL fast- I only bump the tab rocker switch lightly to get all the movement I want, takes a little different technique.
|
Originally Posted by Nova 26
(Post 2430080)
I'm using them for my tabs. Open 72 is right, you have to reverse them, I just ran the hydraulic lines up to the down port on the tab. The only difference is that the drive pump runs the tabs REAL fast- I only bump the tab rocker switch lightly to get all the movement I want, takes a little different technique.
|
Trim Tab Pumps run higher pressure
|
Movin, blue is up (high pressure side) on a drive. I aways remember it by blue sky green grass
|
you can vary the speed a bit by changing the viscosity of the hydraulic fluid - jeff
|
yes you can use the outdrive pumps for the k-planes changed mine last summer with no problems they are faster but imop they work better
|
| All times are GMT -5. The time now is 09:59 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.