Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   eddie marine tabs (https://www.offshoreonly.com/forums/general-q/182261-eddie-marine-tabs.html)

007joe 03-16-2008 06:52 PM

eddie marine tabs
 
2 Attachment(s)
does anybody have any experience with either the sport tabs or the full size pictured below? i've gotten mixed signals regarding the hydraulic actuators..... I am STILL looking for set of tabs and want to go brand new. I have a 2006 Velocity 260.... Any input would be really appreciated!

zahndok 03-16-2008 07:07 PM

The tabs like the blue ones pictured I have seen installed on several boats at the lake. Looked like quality pieces. Haven't heard the owners of the boats every complain about them.

98itrwhite 03-16-2008 07:22 PM

i have the full size eddie marine tabs(bottom pic), they work great. the install is a little time consuming but any tab install will be.

Young Performance 03-16-2008 11:10 PM

I have installed many sets of them (pic on right)over the last few years, since their release. I did have quite a few problems with the rams on the first few sets. The snap rings were coming out of the bottom of the rams. I also had a few hoses come apart and make one hell of a mess. The later models seem to be better. I have not used any in a while, so hopefully they have it all fixed.
I have used the Dana tab, which is basically the same thing. I think the Eddie is basically a copy of the Dana. Didn't have any problems with the Dana, but it is a little more money. Hope this helps, Eddie.

DiamondPerformance 03-17-2008 07:10 AM

1 Attachment(s)
Eddie also just released these, a replacement for the Merc. mounting plate and tab.

Mr Gadgets 03-17-2008 07:31 AM

I have the Dana model that looks like the blue ones in your pic Joe. I have had them since 1999 when I rigged my boat. The power coating started to peel off the first year, but I was not able to get them back to Dana. They have worked flawlessly since then, except for the peeling.. one of these days I am going to get that taken care of..
I am running a 283 Checkmate Convincer with stand off box. The tabs are a nice addition..
Hope that helps.
Dick

Elite Marine 03-17-2008 07:52 AM

We have the Dana tabs and have moved quite a few sets with no issues to date.

Let me know if i can provide a quote.

[email protected]

Kirk

Yellow_ICC_OK 04-02-2008 02:59 PM

Joe...
 
I have a brand new set of red 24's if you want them. Decided not to use them...they are gorgeous, never installed. Might sell but still trying to decide...

DKerns 04-02-2008 04:47 PM


Originally Posted by okeagle25 (Post 2510459)
I have a brand new set of red 24's if you want them. Decided not to use them...they are gorgeous, never installed. Might sell but still trying to decide...


OKeagle, I believe Joe bought his already. If so, I would be interested!

Thanks

Yellow_ICC_OK 04-02-2008 09:24 PM

tabs
 
[email protected], I will get back to ya!


All times are GMT -5. The time now is 03:54 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.