Offshoreonly.com - Update of Hybrid tabs

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Update of Hybrid tabs (https://www.offshoreonly.com/forums/general-q/18301-update-hybrid-tabs.html)

formula31

02-17-2002 08:29 PM

Update of Hybrid tabs

1 Attachment(s)

Well here they are before going on the boat. They are 280 tabs with a pair of bennet cylinders and homemade hinges. Each side will be powered with its own bennet pump. They will be replacing a pair of bennet 24" wide x 12" deep stock bennet tabs that werent doing much on a 60 mph 30 ft cruiser. Ill let everybody know how they work out in spring.

formula31

02-17-2002 09:13 PM

1 Attachment(s)

One more pic

puder

02-17-2002 10:38 PM

FRANKENTABS!!!!!!!!!!!!!

Whiteknuckle

02-18-2002 06:33 AM

They look good. I am very interested in how they work out, especially if the two pumps raise and lower the tabs at the same speed. Keep us informed.

cobra marty

02-18-2002 07:00 AM

'Necessity is the mother of invention' Hope they work for you.

formula31

02-18-2002 07:17 AM

Me too. Total investment less than $500 including trim indicators.

CheckmateF1

02-19-2002 07:40 PM

Formula31, Where did you get the 280 tabs? Just wondering cause HOT BOAT here on the board may need one.

Thanks, Eric

formula31

02-19-2002 07:49 PM

I bought them from the board classifieds from a nice gentleman who went bigger.

All times are GMT -5. The time now is 09:38 PM.