|
Raw Water Pump Hose Connections
Anyone know which connection goes to the suction and which goes to discharge? Its a merc raw water pump with an 1-1/4 hose connection top and bottom. Should be normal engine roation. Its on a 1995 Top Gun. I should have taken a picture prior to pulling motors.
Any help is appreciated. |
The one next to the engine block is the suction, or the hardest one to get to.
|
I would look at the outlets on the pumps just to make sure .......should say "in" for LH rotation and "out" for RH rotation ... your motor should be LH rotation ....its stamped on the back of the pump ...
|
1 Attachment(s)
Bottom hose is the suction.
|
Originally Posted by Noise Pollution
(Post 2525356)
Bottom hose is the suction.
|
Originally Posted by HighPriority
(Post 2525290)
The one next to the engine block is the suction, or the hardest one to get to.
|
Originally Posted by offthefront
(Post 2525314)
I would look at the outlets on the pumps just to make sure .......should say "in" for LH rotation and "out" for RH rotation ... your motor should be LH rotation ....its stamped on the back of the pump ...
Makes sense how Noise Pollution stated. |
With the pump mounted the connections are just about vertical. The top will go to the oil cooler and the bottom back to the drive.
|
Originally Posted by Noise Pollution
(Post 2525600)
With the pump mounted the connections are just about vertical. The top will go to the oil cooler and the bottom back to the drive.
|
| All times are GMT -5. The time now is 12:21 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.