prop ????
 

Im running a mirage plus 21 I get chine walk what are my option to get the stern higher with out losing any top end?

Ahhh....... maybe you should tell us what kind of boat you have, what engine etc etc.....checked your profile for some info too........nothing.

1999 wellcraft 20' excalibur 7.4mpi bravo 1

If your trying to get some stern lift try a Hydromotive. I have had really good luck on My Fourwinns Liberator using a Q4. I lost some top end but I also went up a size. I have a 454 Mag and the boat is a 21 with a Bravo 1.

crmax, Niuhi is right. I would try a Hydromotive 4 blade. Call them up and see what they have to say. I spoke with Gary from there yesterday for the better part of half an hour because I want some stern lift too.

Like Niuhi I have a Liberator but I have twin SBC's with Alphas. Gary suggested going to a Hydromotive Quad IV O/T. The prop was actually designed for outboards but he said they work awesome on Alpha's. I'm sure he would have a different recommendation for you based on your engine and drive.

Here is the number 330-425-4266. They will help you out. Not to mention they are good looking prop.

thanks, another prop to buy, I just bought a used mirage plus 23 the 21 was hitting the rev limter

I guess I wont tell you about the 22 Q4 I bought on ebay for $85. including shipping :D and the prop has very little time on it.

dou!!