Offshoreonly.com - rocker arm stud installation

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - rocker arm stud installation (https://www.offshoreonly.com/forums/general-q/186441-rocker-arm-stud-installation.html)

CN24	05-11-2008 06:50 PM

rocker arm stud installation

Do you need to apply anything to the treads other than oil? I took out the old studs and it looked like there was something like RTV on them.

mrhorsepower1

05-11-2008 07:58 PM

ARP Thread Sealer

Noise Pollution

05-11-2008 08:55 PM

Some heads they run into the intake port. Use a sealer you'll be safe. I used an RTV.

Griff

05-11-2008 09:05 PM

I locktited mine in. Didn't want to take a chance on them coming loose at 5000rpms.

I'm sure the ARP thread sealer would work as well.

CN24	05-12-2008 01:49 PM

Loctite blue or red?

Noise Pollution

05-12-2008 08:32 PM

If your scared of they coming loose, use the red.

Griff

05-12-2008 10:06 PM

I used red. I figured I would never have to remove them anyway.

All times are GMT -5. The time now is 02:41 PM.