Hydraulic hosee
Anyone know of a good source for hydraulic steering hoses? I think these need to have stainless steel fittings on them. Any suggestions would be appreciated.
|
I imagine you should have a hydraulic shop in your area, they should be able to make up what you need.
|
I know when I went to several local hydraulic shops, they didn't have the right fittings for my steering and they were pretty big commercial outfits. They referred me to the aeroquip dealer which had everything I needed.
|
We Can Make Your Hoses.
Call 586-790-8880 Ext251 |
I bought my hose and ends from IMCO. This way you can make them exactly the length you need. BTW, cutting the hose is a PIA.
|
At my local Parker hydraulic shop I got 80' of Parker 3000 psi hydraulic hose and fittings to do my system for $56. I had to pay for the fittings and he made the rest out of the extra he had laying around. :)
|
Splashandburn.. your email is not working, I need some info asap.. shoot me your address on email if it is working.. Or call me 616-403-1006
Thanks Dick |
Originally Posted by Dave M
(Post 2560044)
I bought my hose and ends from IMCO. This way you can make them exactly the length you need. BTW, cutting the hose is a PIA.
|
The Imco fittings are real nice and ez to install .... the cutoff tool is the trick ....cept we used an electric one ....m
|
All times are GMT -5. The time now is 05:52 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.