Offshoreonly.com - Stainless Marine and O2 sensors

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Stainless Marine and O2 sensors (https://www.offshoreonly.com/forums/general-q/187102-stainless-marine-o2-sensors.html)

Rookie

05-20-2008 01:10 PM

Stainless Marine and O2 sensors

I am thinking of getting some Innovative F/A devices. Would I be able to weld in bungs into my Stainless Marine tails? Where? They are long TRS tails that are dry to the tip.

http://i43.photobucket.com/albums/e3.../tailpipes.jpg

RunninHotRacing163.1

05-20-2008 01:24 PM

Gotta be close enuf to the end & have enuf room to get the Tig all the way around or cut a donut out and weld the bung inside and tig the donut back shut on the bottom a lil less noticable

JIMG	05-20-2008 06:03 PM

you can send them back to stainless marine, they will install a stainless steel bung for about $75 each (last I did it)

tmdog

05-21-2008 08:35 AM

1 Attachment(s)

Had the EMI's long pipes done like this.

All times are GMT -5. The time now is 06:46 AM.