Offshoreonly.com - installed valve spring height on a 454 mag

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - installed valve spring height on a 454 mag (https://www.offshoreonly.com/forums/general-q/187110-installed-valve-spring-height-454-mag.html)

lake speed

05-20-2008 02:45 PM

installed valve spring height on a 454 mag

I have a set of 990 heads being redone off of my 454 mag and the machine shops needs the installed height of the valve springs. I could also use the recommended seat pressure and the recommended psi of the spring when open. I need this asap! help please.:D

Griff

05-20-2008 04:35 PM

I can you tell you the stock cam specs and they might be able to work off that.

.510/.510 , 220/220, 115 lobe separation.

ezstriper

05-21-2008 07:01 AM

about 1.900 should be fine, thats what mild comp cams springs are designed to run at, spring pressure going to be with spring choice at that height...Rob

All times are GMT -5. The time now is 03:04 AM.