Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - oil pan (https://www.offshoreonly.com/forums/general-q/187930-oil-pan.html)

ak	05-31-2008 10:11 PM

oil pan

hey guys,
I would like to put a nice aftermarket oil pan on my 509ci before reinstalling and i was wondering any thoughts are comments on this?I am sure miloden makes a nice one or moroso.?????if so anyone have part numbers?

hoozeyurdaddy

06-01-2008 08:46 AM

If you are in salt water, it will need a good coat of paint to keep from corroding, if you are going for larger capacity, make sure you get the right pick up with the pan, look in jeg's or summitt, there are a lot to chose from.

DareDevil

06-01-2008 09:03 AM

I have a nice one for you .
10 Quart offshore racepan with special feature's.
asking $ 500 + ship.

Its a PROCAM # 9285

Elite Marine

06-01-2008 09:05 AM

We can get many manufacturers pans. Once you narrow it down let me know and we'll see what we can doon price for you.

[email protected]

Kirk

GPM	06-01-2008 09:34 AM

Quote:

Originally Posted by ak (Post 2575850)

What block are you running?

ak	06-01-2008 10:19 AM

I am running a gen 5 502 block,i would like to spend about $200 on this pan and it is for looks,not a bigger capacity,also i am in fresh water,any part numbers for a stock replacement?

GPM	06-01-2008 10:45 AM

Quote:

Originally Posted by ak (Post 2576074)

I am running a gen 5 502 block,i would like to spend about $200 on this pan and it is for looks,not a bigger capacity,also i am in fresh water,any part numbers for a stock replacement?

You might find one on Ebay. If you are going to run WOT a lot you should go larger than stock.

All times are GMT -5. The time now is 08:14 PM.