DART PRO 1 vs AFR
 

anyone with real world experience with the Pro 1's vs the AFR's or they just as good etc, they seem to be priced less than the AFR's.

later

Ttt

That's an impossible question to answer. It all depends on your engine, cam and exhaust- not to mention if you're using some sort of forced induction. Then you get into the bare heads vs. CNC bowls vs. full CNC porting vs. CNC/hand-worked porting.

There are a gazillion variables and when you move one piece, the others change.

Heres some good reading material about your question

http://www.offshoreonly.com/forums/s...light=dart+afr