![]() |
Gaffrig Gps speedo NG
Finally installed the speedo last week. Bought it used here on oso. Was supposedly tested from gaffrig. Well when I power it on it goes up to 80 then say 50 then 30 then 0. Is that normal. Also doesnt work. Im using the external signal out from my existing GPS for an antenna. That mite be the problem. Any thoughts.
|
check that the out put on the gps is set right. It can be changed for different devices.
|
Very interesting. I guess that would require a book and some reading. I think I can check into that. THANKS
|
Originally Posted by z.zuperboat
(Post 2628975)
Finally installed the speedo last week. Bought it used here on oso. Was supposedly tested from gaffrig. Well when I power it on it goes up to 80 then say 50 then 30 then 0. Is that normal. Also doesnt work. Im using the external signal out from my existing GPS for an antenna. That mite be the problem. Any thoughts.
|
I have a 2002 35' Reggie Fountain Special Edition that I have owned since 2002. The conventional speedometer keeps torn up all the time. I am wanting to put a GPS speedometer in my boat. The problem is the inside diameter of the hole in dash where the old speedometer was is 3 3/4 " in diameter and I cannot find any white in color GPS that is that size and the outside needs to be around 4" to cover the GPS hole and be flush with the dash. If anyone has any suggestions or any knowledge of what I can do to make this work please let me know. The GPS needs to read around 120. However, it is not that fast. I have twin 575's that have been update with the 80 hp kit's which make it around 655 hp. Runs a solid 100 MPH all the time. With around 40 gals of fuel, a small almost flat chop and 2 people will run 102-103 mph. I appreciate any help you can provide. Harold
|
[QUOTE=NancyT;4660732]I have a 2002 35' Reggie Fountain Special Edition that I have owned since 2002. The conventional speedometer keeps torn up all the time. I am wanting to put a GPS speedometer in my boat. The problem is the inside diameter of the hole in dash where the old speedometer was is 3 3/4 " in diameter and I cannot find any white in color GPS that is that size and the outside needs to be around 4" to cover the GPS hole and be flush with the dash.
I have a slightly used white Gaffrig 120 MPH GPS speedometer, the very outer edge measures 3 3/4, it came with a colored trim ring that I reused when I replaced it. |
***
|
This is a 10 year old thread. Most any 3 3/8 should work Livorsi Marine, Inc. - Mega and Race Series Speedometers |
Here is my view on GPS speedometer. Throw the Speedo out, use the speed readout from your GPS chartplotter and put a usefull gauge in the hole left by the junky speedometer.
Padraig |
Originally Posted by NancyT
(Post 4660732)
I have a 2002 35' Reggie Fountain Special Edition that I have owned since 2002. The conventional speedometer keeps torn up all the time. I am wanting to put a GPS speedometer in my boat. The problem is the inside diameter of the hole in dash where the old speedometer was is 3 3/4 " in diameter and I cannot find any white in color GPS that is that size and the outside needs to be around 4" to cover the GPS hole and be flush with the dash. If anyone has any suggestions or any knowledge of what I can do to make this work please let me know. The GPS needs to read around 120. However, it is not that fast. I have twin 575's that have been update with the 80 hp kit's which make it around 655 hp. Runs a solid 100 MPH all the time. With around 40 gals of fuel, a small almost flat chop and 2 people will run 102-103 mph. I appreciate any help you can provide. Harold
|
2002 Fountain GPS Speedometer
Originally Posted by Griff
(Post 4660766)
I have the same size water speedo. I assume you don't have enough room to enlarge the hold for a Monster 4 5/8 guage?? Livorsi makes an adapter bezel that will cover the hold and allow you to run a 3 3/8 speedo.
That is correct NOT enough room to enlarge the hole. If I use the Livorsi, is it a white face with readings from 0 to 120 mph? Do you know the cost of the GPS, antenna and module with the adapter plate? Any idea on who to call for this setup? I really appreciate your help. Harold |
[QUOTE=GPM;4660734]
Originally Posted by NancyT
(Post 4660732)
I have a 2002 35' Reggie Fountain Special Edition that I have owned since 2002. The conventional speedometer keeps torn up all the time. I am wanting to put a GPS speedometer in my boat. The problem is the inside diameter of the hole in dash where the old speedometer was is 3 3/4 " in diameter and I cannot find any white in color GPS that is that size and the outside needs to be around 4" to cover the GPS hole and be flush with the dash.
I have a slightly used white Gaffrig 120 MPH GPS speedometer, the very outer edge measures 3 3/4, it came with a colored trim ring that I reused when I replaced it. Why did you replace the Gaffrig GPS speedometer? Is it in good shape and does it work well? I need one that will read up to 120 mph. Is the opening for the Gaffrig to go in measureing 3 3/4inches. The opening has to be that size and the ring on the GPS outer is around 4 inches. Let me know what you want for it and do you have the antenna and connection box with it? |
Originally Posted by NancyT
(Post 4660841)
__________________________________________________ __________________________________________________ _________________________________________
That is correct NOT enough room to enlarge the hole. If I use the Livorsi, is it a white face with readings from 0 to 120 mph? Do you know the cost of the GPS, antenna and module with the adapter plate? Any idea on who to call for this setup? I really appreciate your help. Harold |
[QUOTE=NancyT;4660843][QUOTE=GPM;4660734]
__________________________________________________ __________________________________________________ _____________________________________________ Why did you replace the Gaffrig GPS speedometer? Is it in good shape and does it work well? I need one that will read up to 120 mph. Is the opening for the Gaffrig to go in measureing 3 3/4inches. The opening has to be that size and the ring on the GPS outer is around 4 inches. Let me know what you want for it and do you have the antenna and connection box with it?[/QUOT There was nothing wrong with it, my boat ran a little faster than 120 so I replaced it with a digital. I only have the speedometer, Livorsi sells everything else you need, click the link above for the antennae and trim ring. PM your email and I'll send you a couple of pictures. |
http://www.livorsi.com/images/catalo...s/bezel_fl.gifstandard speedo or tach3 3/8"4 1/4"FL338 + color
|
[QUOTE=GPM;4660845][QUOTE=NancyT;4660843]
Originally Posted by GPM
(Post 4660734)
__________________________________________________ __________________________________________________ _____________________________________________
Why did you replace the Gaffrig GPS speedometer? Is it in good shape and does it work well? I need one that will read up to 120 mph. Is the opening for the Gaffrig to go in measureing 3 3/4inches. The opening has to be that size and the ring on the GPS outer is around 4 inches. Let me know what you want for it and do you have the antenna and connection box with it?[/QUOT There was nothing wrong with it, my boat ran a little faster than 120 so I replaced it with a digital. I only have the speedometer, Livorsi sells everything else you need, click the link above for the antennae and trim ring. PM your email and I'll send you a couple of pictures. What do you want for the GPS that came out of your boat? Please send me a couple more pictures. I assume diameter of the GPS is 3 3/4 inches which will exactly fit my hole of 3 3/4 inches. MY cell number is 502-533-5486 so you can send me more pictures and the price via a text. Harold Dillingham @ 6:12 PM on Sunday |
| All times are GMT -5. The time now is 01:10 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.