Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Merc 6.2 ???????? (https://www.offshoreonly.com/forums/general-q/192065-merc-6-2-a.html)

shw-n-go h20 07-28-2008 01:52 PM

Merc 6.2 ????????
 
i was out running around yesterday for about 3 hours, we were in smooth water and only cruising about 3500-3900 rpm's. we had stopped and idled for a while then took back off, about 10 min later i hear what sounds like i just scattered a motor, these are bone stock with about 300 hours on them, i had good oil pressure and the temp was fine.

has anyone heard of this before? i was wondering if this maybe a one time thing or if it is common on this motor.

i shut it down as soon as i heard it, when i opened the hatch there was nothing out of place, so i turned the key so i could listen to it, it started right up but sounded like there was loose gravel in the head...

DMOORE 07-28-2008 03:29 PM

Ouch. I'd first pull the valve covers, and drain the oil/ inspect the filter. Could be a lot of things up top. If it did break something in the top end, you dont want to run the oil with debris in it. Keep us posted.


Darrell.

shw-n-go h20 07-28-2008 03:49 PM

we are pulling them tonight, i'll post up what we find..

Dave_N 07-28-2008 04:54 PM

Did you see this thread?

http://www.offshoreonly.com/forums/s...&highlight=6.2

show-n-go h2o 07-28-2008 08:09 PM

well i feel kind of stupid and some relief at the same time, i had the marine mecganic listen to it before we started removing things and it turns out tht it's not the engine at all, the outdrive is blown. it's a sound i've never heard before and one i'll never forget... so now i need to buy a drive

osur866 07-29-2008 01:07 AM

U-joints or gears?? Steve

Mbam 07-29-2008 05:49 AM

Sorry for your problem. I assume you have Bravo's. Kind of unusual to pop a Bravo with a small block. Might want to try and figure out why.

If that is a 1.65 ratio I have some at a good price.

shw-n-go h20 07-29-2008 10:04 AM


Originally Posted by osur866 (Post 2637709)
U-joints or gears?? Steve

gears

shw-n-go h20 07-29-2008 10:05 AM


Originally Posted by Mbam (Post 2637746)
Sorry for your problem. I assume you have Bravo's. Kind of unusual to pop a Bravo with a small block. Might want to try and figure out why.

If that is a 1.65 ratio I have some at a good price.


1.5, let me know


All times are GMT -5. The time now is 11:47 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.