Offshoreonly.com - #6 drive service in Illinois ????

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - #6 drive service in Illinois ???? (https://www.offshoreonly.com/forums/general-q/192980-6-drive-service-illinois.html)

Quote:

Originally Posted by Dueclaws (Post 2651269)

Bill-
That's the way to crate them. Did you contact Craig; he never returned my calls, emails. Did you find another shop?
Due

YEP!!!!!!!!!! seems those guys in Florida let the answer machines do the work so they can get chit done in the shop ..... :ernaehrung004: you've got mail

Quote:

Originally Posted by RunninHotRacing158 (Post 2651273)

YEP!!!!!!!!!! seems those guys in Florida let the answer machines do the work so they can get chit done in the shop ..... :ernaehrung004: you've got mail

Craig went through both of my #6's last fall and I couldn't be happier with his work.

I used to be a Cola fan too.
Bill, I sent you a PM.
John

Quote:

Originally Posted by RunninHotRacing158 (Post 2651214)

Thnx guys already crated her up and she's halfway to sunny florida by now ... L@@ks like we'll be needin more then bearings & seals :eek: I thought them #6s could handle 18 lbs of B@@st:ernaehrung004::ernaehrung004:

Sixes are junk!

Wait till ya see the lowers.

Quote:

Originally Posted by KNOT-RIGHT (Post 2651485)

Sixes are junk!

Wait till ya see the lowers.

So BIG Daddy its ARNESON time ?????? :ernaehrung004:

Quote:

Originally Posted by RunninHotRacing158 (Post 2651637)

So BIG Daddy its ARNESON time ?????? :ernaehrung004:

At least you cant say I was kidding a bought drive busting. We need to get that rig down here to the Chesapeake Bay and really ring her out for 100s of miles on 1 to 2 foot chop as a change of pace from that wild big ass water you guys run on.
Good luck with your rig Bill Craig is the best!
Glen AKA Wildwarrior

Quote from March 08

We ran up to 16lbs on 93 pump gas safely engine wise before we settled on 13lbs + we could go higher however our test rig and drives don't do well with that much power it's a hand full to drive and we destroyed several gear sets in our #6s. The injection really allows us to make hp on pump gas.!

http://www.youtube.com/v/_JrlY46kRjs

Quote:

Originally Posted by WildWarrior (Post 2651655)

Glen Glen Glen before we settled on 13lbs +:eek: we'll get her wound up ... egts & O2s are L@@kin great a few more pulley changes and another set of props and she'll be good, hopefully i dont have to have a spare set of drives on the shelf too:ernaehrung004::ernaehrung004:

Quote:

Originally Posted by Dueclaws (Post 2651820)

:cool-smiley-027:

YEP !!!!!!!!!!!!! damn Glenn :ernaehrung004::ernaehrung004: