|
Thanks again fellas. I picked up an impeller and a exhaust temp sensor just to be safe. I will try to change the impeller tonight and go to the lake if it ever stops raining here. I need to get it running right befor the holiday weekend.
I will do a write up on the whipple install, and I think I will pull the motor and add some forged rods and pistons since it is getting close to the end of the season. Dustin,I will be in contact on your suggestions for pistons etc as soon as my box arrives. Thanks again Mitch. |
Just be sure that there is no grooves in the impeller housing.
Here's a link to the video of your boat, you'll have to sit through a few minutes of some other boats, yours is at the end. http://www.youtube.com/watch?v=7qThXGeJxkU |
|
Originally Posted by 22 DAYTONA
(Post 2658704)
Thanks again fellas. I picked up an impeller and a exhaust temp sensor just to be safe. I will try to change the impeller tonight and go to the lake if it ever stops raining here. I need to get it running right befor the holiday weekend.
I will do a write up on the whipple install, and I think I will pull the motor and add some forged rods and pistons since it is getting close to the end of the season. Dustin,I will be in contact on your suggestions for pistons etc as soon as my box arrives. Thanks again Mitch. |
The impeller fixed my problems. Thanks guys.
|
| All times are GMT -5. The time now is 05:27 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.