Offshoreonly.com - exhaust identification

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - exhaust identification (https://www.offshoreonly.com/forums/general-q/195395-exhaust-identification.html)

duunoit

09-15-2008 10:00 AM

exhaust identification

Anybody know what brand these are? Thanks

http://images.craigslist.org/0115060...57f6002810.jpg

kennyo

09-15-2008 10:31 AM

U need Lightnings!!!

CPPerformance

09-15-2008 01:58 PM

Those look like Torque engineering manifolds. They are no longer around but make excellent power. An easy way to tell is if you take the riser off and look at the gasket it is the same as a dominator gasket. I would hold on to them and run them.

MOBILEMERCMAN

09-15-2008 02:01 PM

Didn't they have a problem with the riser casting being too thin? Or was that Lightening ?
Around '92-'94

CPPerformance

09-15-2008 02:42 PM

Quote:

Originally Posted by MOBILEMERCMAN (Post 2686435)

Didn't they have a problem with the riser casting being too thin? Or was that Lightening ?
Around '92-'94

Not sure, its a possibility, the manifolds changed hands a lot between a couple companies.

All times are GMT -5. The time now is 08:45 PM.