Originally Posted by CPPerformance (Post 2703101)

Yes, the plate coolers are much more efficient than your standard round tube style oil coolers, that cooler would more than do its job for your application, there is somewhat of a slight chance it could be too efficient and the motor would run too cold in that case you would need an oil thermostat, I would try it first though. :drink:

Originally Posted by DesertRage (Post 2703168)

Brian,

Do you by chance have the external dimensions of those coolers? How do they compare to this style? I understand an external thermostat would be needed. http://www.cpperformance.com/detail.aspx?ID=912
(3" x 19" round)

Thanks,
Jon

Originally Posted by CPPerformance (Post 2703202)

The 8 plate- 12" long, 5" wide, 3" thick
The 13 plate-12" long, 5" wide, 4 1/2 thick
Those measurements are without fittings in the ends.
Both have a boss on the back to remote mount pretty much anywhere such as the top of the merc bellhousing. There are also an cooler nuts available to go with it for extra money but add convenience.

Originally Posted by Nordicflame (Post 2703955)

One more question Brian...
Are the required oil fittings o-ring style with 7/8 straight thread?
Dave