|
Cracked prop
This one is new to me. I have a Bravo 26 that cracked about half through from the top fat side not a mark on it. Other thatn the break it looks like the day I bought it. Your thoughts?
|
unless you are spinnig it some super high RPM, flowed material
|
I have a matching 26 4-blade that did the same. Never hit anything, just noticed the crack while cleaning one day. Same area you describe and goes about half way down the thick part of the hub.
|
BBlades Brett fixed a 3" long crack for me when he was at Merc racing. Give him a call.
|
Mine did the same thing,,,, but they are labbed,,,, thought maybe they were to thin.
|
Originally Posted by ezstriper
(Post 2720279)
unless you are spinnig it some super high RPM, flowed material
|
Originally Posted by Boomer 880
(Post 2720295)
I have a matching 26 4-blade that did the same. Never hit anything, just noticed the crack while cleaning one day. Same area you describe and goes about half way down the thick part of the hub.
|
Originally Posted by Thunderstruck
(Post 2720327)
BBlades Brett fixed a 3" long crack for me when he was at Merc racing. Give him a call.
|
Same Here Cracked A Blade
|
Originally Posted by RBeyer
(Post 2720485)
Are they safe to repair?
|
It actually happens quite a bit. depending on the location of the crack, it may or may not be fixable. Post a pic in prop section for BBlades.
|
| All times are GMT -5. The time now is 11:07 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.