Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   IMCO Lower on a Nordic Rage (https://www.offshoreonly.com/forums/general-q/199088-imco-lower-nordic-rage.html)

DesertRage 11-19-2008 01:37 PM

IMCO Lower on a Nordic Rage
 
Does anyone have any experience with IMCO lowers on a Nordic Rage? I am wondering if a standard length or -1 shorty would be beneficial on an 80+ Rage. I just picked up an XR upper and am looking for the best option for the lower. The hull has a step, pad, and notched transom.

Thanks,
Jon

CB-BLR 11-19-2008 05:30 PM

I would ask over on the Nordic forum.

I have an IMCO Extreme SC on my boat, which has the same lower as you are thinking about, and think it works well.

Chris

DesertRage 11-19-2008 05:34 PM

Thanks Chris,

Does your SC have have a standard length lower?

Jon

CB-BLR 11-19-2008 05:52 PM

Yes it does have a standard length lower.

I think that the better question is: what is your propshaft depth to keel measurement?

Mine was set at 3.5 inches from bottom of keel to propshaft centerline from the factory. I did testing with a 1" and then 1.5 inch spacer and found that my boat was faster with the 1.5 inch spacer. This brings my keel to propshaft measurement to 5". My boat is an open bow, and needs the extra bow lift.

When I got my boat, the fastest it would go was 77mph.

It now does 81.5 mph.

Same prop

Chris

P.S. There is a lot of info on this in the Nordic forums, lower down, this site.

Nordicflame 11-19-2008 08:57 PM

Gents,
Unless someone has tried a shorty on a Rage it will be a complete unknown.
The Rage and Heat are "completely" different animals.
I think Jon is hoping for some actuals but I don't know of any off hand.

Dave

kennyo 11-20-2008 08:16 AM


Originally Posted by CB-BLR (Post 2743107)
I would ask over on the Nordic forum.

I have an IMCO Extreme SC on my boat, which has the same lower as you are thinking about, and think it works well.

Chris

Ditto. Ive seen a thread in the Nordic section.

DesertRage 11-20-2008 12:53 PM

Thanks Guys,

I've searched the Nordic form and have found lots of info on Heats and generic talk about IMCO's, but really am looking for a first hand experience with my suggested combination.

Don't want to duplicate someone else experiment if I don't have to. :crazy:

Knowing the X would be a good start. I'll measure that over the weekend.

Jon

Steve Zuckerman 11-22-2008 09:24 AM

Jon,
Bob Loyd should have some information on this. He rigged Instigator's 900HP Rage, and I am pretty sure it had an Imco lower on it. He probably hasn't seen your inquiry in general Q&A. Ask on our forum and he will probably be able to give you the info you are looking for.
As I recall the boat was smokin' fast (they brought it to LY's East Coast LC Regatta), but took some driving over 90. Not surprising with 900+HP in a 25'er of course :cool:.......
Steve

Nordicflame 11-22-2008 10:15 AM

You want a fast Rage; Try this one... 114.1 and still playing around :eek:
I'll post this over on the Nordic section as well.
Dave

http://www.youtube.com/watch?v=3U9nYk3kcdg


All times are GMT -5. The time now is 11:15 AM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.