|
k plane bolts
Anybody have a source for the k plane bolts that go through the lower part of the ram and have the extended stud to bolt on the trim tab indicator cables....thanks.
|
mercury or c.p performance or livorsi.
|
1 Attachment(s)
|
Thanks...I just found that this morning. Damn they got those k plane parts tucked away. Took some time navigating through the sight to find them.
|
i bought a new set of 380's a few years back , was suprised that they didn't come with the stud/bolt for the indicator cable..:mad:
|
Tab Pins
Check and see if these are the ones you need, I order for my boat the Merc ones are bigger than Keifoffer( don't mine spelling ) planes. The ones I ordered were
2-Pins 17-8M0008641 4- Bushings 23-89574-1 2- Spacers 23-891576 4-Washers 12-846377 If this is what you are looking for I sell them to you at dealer cost, plus shipping. I only opened one of the pins. I justed order them last month. Now if I could figure out what the part for the ones I need. I think the Merc 280's are 1/2 pins and The Keifoffer 280's are 3/8 pins |
Originally Posted by Clustergear
(Post 2763439)
Check and see if these are the ones you need, I order for my boat the Merc ones are bigger than Keifoffer( don't mine spelling ) planes. The ones I ordered were
2-Pins 17-8M0008641 4- Bushings 23-89574-1 2- Spacers 23-891576 4-Washers 12-846377 If this is what you are looking for I sell them to you at dealer cost, plus shipping. I only opened one of the pins. I justed order them last month. Now if I could figure out what the part for the ones I need. I think the Merc 280's are 1/2 pins and The Keifoffer 280's are 3/8 pins |
Originally Posted by Clustergear
(Post 2763439)
Check and see if these are the ones you need, I order for my boat the Merc ones are bigger than Keifoffer( don't mine spelling ) planes. The ones I ordered were
2-Pins 17-8M0008641 4- Bushings 23-89574-1 2- Spacers 23-891576 4-Washers 12-846377 If this is what you are looking for I sell them to you at dealer cost, plus shipping. I only opened one of the pins. I justed order them last month. Now if I could figure out what the part for the ones I need. I think the Merc 280's are 1/2 pins and The Keifoffer 280's are 3/8 pins |
Left a message on your cell phone. My cell is 914-774-9427
|
Thanks Ricky...sorry my phone kept dropping you. I'll get that check out to you.
|
| All times are GMT -5. The time now is 05:14 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.