Oil pressure gauge
 

I have dart gen 4 standard deck blocks.Where is the best place to put my elec.oil pressure sending unit for the dash.I would also like to run a manual guage on the block .I have two ports back by the bellhousing.and one down where the filter goes.Is there any place else I could use or should use. Thanks JOHN

If you are facing the rear of the block, there is a port just below the left ( odd side ) side deck. I hooked my gauge up there.

In the remote oilfilter mount !!!!!!

You do not whant any oilflow restriction in the block !!!!!!!

Remote oilfiltermount should have 2 spots ,1-for oiltemp &
1-for oilpress.
:ernaehrung004:

What happens to the pressure gauge if the block goes in by-pass???