dry sump belt and bracket setup
 

Hi! Does anyone know of anyone who makes these setups? I have a Keith Eickert three stage stainless sea pump. I know he has a whole setup with a crossover that mounts the alternator up high and power steering above the sea pump. It mounts off the crossover. Then the dry sump oil pump mounts low where the alternator used to be. I have seen other setups, but don't know who makes them. Any input on other brands or any advice on them would be appreciated. Thanks Charlie

We found out the hard way running real high boost for several seasons and taking out an occasional blower belt,know big deal always keep a few in stock and on the boat..

A few seasons back our blower belt took out our oil pump belt at well over 6000 rpms and we threw a Carrillo through the block.

Now we have a spare sleeved Dart block and a spare repaired crank all because of a $150.00 blower belt..

We also run Kieth's three stage water pumps and billet oil pump.

Rudy Dryden our engine builder fabricated our guards following our sudden pop.

I will ask Rudy what it would cost for a pair!

Here is pick of one of our aluminum guards, real simple but protects the oil pump belt just fine!