Help...closed cooling setup..sbc alpha 1
 

Hey Guys
I am currently setting up closed cooling system on sbc alpha 1.
The raw water tstat housing is still in place.
I am seeking advice and diagrams on the best way to setup as there is so many options.
The header tank is plumbed into the 1.25" raw water in position.
I am currently drawing and pushing coolant to h/exch via pump in and large tstat out and blocking the two tstat that should go to the exh mani.
I was thinking that this would provide full flow over exhausts.
Theres a hundred ways to hook this up but only one right way!!
Can anyone help please?