|
EMI Thunder Exhaust
2 Attachment(s)
Okay, let the mocking begin! :stupid:
Being new to the offshore scene, I bought parts in advance in hope that as I collected, things would fit. :boat: I have two sets of risers (I ordered 1 pair of risers, I got a pair of riser pairs!) which I thought would fit my exhaust, problem was, I didn't have the exhaust yet either! As it turns out, there's a difference between risers at the base (who knew?) The ones I have fit the round hole with a long thin rectangular flange with the water that pipes around the exhaust hole to the risers, which then dumps at the end, mixes and exits. My exhaust however, Eddie Marine Thunder (EMI) has the rectangular holes with the water jackets that match up with the risers and the hoses. In other words, not only do I have risers that don't fit my exhaust, I have two pairs of the bloody things!!! :mad: Can anyone steer me toward the right risers? Better yet (see my add in the 'Wanted' section) does anyone have A pair (2 risers, 1 pair, 2 bits only) of risers that will fit that they might want to swap for the two pairs I have? They're new, I just have absouletly no use for them! I'll post pics soon, I left my camera in my shop! What risers do I need? Is there an adapter I can buy? The pic is of the exhaust I have with the risers I don't have but need! Any help?? :angry-smiley-038: Note to self, in future, ask here first, then buy! Duh!!! Thanks in advance, John |
1 Attachment(s)
Is this what I need???
|
Is there an adaptor plate to fit the risers or has anyone made one that can help?
|
Originally Posted by Ghostrider
(Post 2835893)
Okay, let the mocking begin! :stupid:
Being new to the offshore scene, I bought parts in advance in hope that as I collected, things would fit. :boat: I have two sets of risers (I ordered 1 pair of risers, I got a pair of riser pairs!) which I thought would fit my exhaust, problem was, I didn't have the exhaust yet either! As it turns out, there's a difference between risers at the base (who knew?) The ones I have fit the round hole with a long thin rectangular flange with the water that pipes around the exhaust hole to the risers, which then dumps at the end, mixes and exits. My exhaust however, Eddie Marine Thunder (EMI) has the rectangular holes with the water jackets that match up with the risers and the hoses. In other words, not only do I have risers that don't fit my exhaust, I have two pairs of the bloody things!!! :mad: Can anyone steer me toward the right risers? Better yet (see my add in the 'Wanted' section) does anyone have A pair (2 risers, 1 pair, 2 bits only) of risers that will fit that they might want to swap for the two pairs I have? They're new, I just have absouletly no use for them! I'll post pics soon, I left my camera in my shop! What risers do I need? Is there an adapter I can buy? The pic is of the exhaust I have with the risers I don't have but need! Any help?? :angry-smiley-038: Note to self, in future, ask here first, then buy! Duh!!! Thanks in advance, John look here.... http://www.eddiemarine.com/store/car...&p=13039&c=249 |
| All times are GMT -5. The time now is 08:07 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.