Offshoreonly.com - 454 Mag cam

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - 454 Mag cam (https://www.offshoreonly.com/forums/general-q/206875-454-mag-cam.html)

Waterslinger

04-14-2009 08:31 AM

454 Mag cam

Have a base 310 or 330 454 in a 22 foot Powerquest. looking at sliding in a 454 Mag roller cam 224@50 & 483 lift. Any power to be had with that change. Using aluminum intake.

Pat McPherson

04-14-2009 11:32 AM

Yes, that is worth 20-30 HP...
If you have a Gen VI roller cam 310HP to start, it will be an easy swap.
Putting a Gen VI cam into a Gen IV or Gen V 330HP will require a different timing set and cover, aswell as lifters at min.

All times are GMT -5. The time now is 12:11 AM.