Brass/bronze bushing direction/Bravo
 

Hey Guys!

I just finished reinstalling the prop on Bravo drive after changing the gear oil, there was a brass/bronze plate that sat at the back of the prop shaft, it was the last thing to come off, and the first thing I put back on, but, I wasn't watching and I am not sure if the "stepped" side goes towards the lower unit?, or the prop?, one side of this bushing is "flat" and the other has a smaller "inner" race and I want to make sure I installed it correctly, Thanks!

Its a tapered fit to the shaft, it should be obvious if you put it on backwards. The small inner race sould face the prop.