![]() |
Originally Posted by NightHawk
(Post 2850797)
What's the best way to completely drain the antifreeze on a 496?
It will get in there to take out the plugs because both sides are hard to get to in the boat. There's only one on each side. They are 6 point black plugs with female allen patterens in them. I can't remember what size the allen is but it will twist off easily anyway. I found the 18 universal much easier. Hope that helps. Part number FSUM18A |
Originally Posted by Elite Marine
(Post 2850449)
Well done!! Not enough guys do preventative maintenance and then wonder why they are stranded or miss a weekend.
Enjoy the boat!! I have a 2003 and now i will change mine too. I heard there were issues with that antifreeze. The orifices in the 496 heat exchanger are way huge in comparison and therefore would not cause a problem. Although, a leak anywhere on anything is not good. It does have a five year recommendation. |
| All times are GMT -5. The time now is 02:41 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.