Offshoreonly.com - Exhaust mufflers?

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Exhaust mufflers? (https://www.offshoreonly.com/forums/general-q/207819-exhaust-mufflers.html)

1BIGJIM

04-29-2009 12:28 PM

Quote:

Originally Posted by Bromaguire (Post 2855194)

Has anyone used the Corsa Silencer tips?

I have 4, I will be removing soon.

Here are some pictures.

http://www.offshoreonly.com/forums/g...-mufflers.html

Bromaguire

04-29-2009 02:44 PM

Quote:

Originally Posted by CPPerformance (Post 2855317)

We have seen great results with our XPM525 setup http://www.cpperformance.com/detail.aspx?ID=6801
along with all of our Cyclone HP series clamp on mufflers. http://www.cpperformance.com/SearchR...CategoryID=182
You will see a small drop in RPM but any muffler that actually works is going to have some type of performance loss.

Good luck and let us know if we can help any further.

Will the XPM525 fit over angled tips? This may be a strech but do you have any pictures of this muffler installed on a boat and maybe a sound clip of them?

CPPerformance

04-29-2009 04:24 PM

Quote:

Originally Posted by Bromaguire (Post 2855455)

Will the XPM525 fit over angled tips? This may be a strech but do you have any pictures of this muffler installed on a boat and maybe a sound clip of them?

You would need to cut your tips to be straight before installing the mufflers. Unfortunately I do not have any sounds clips of the XPM525 but I do have an install picture that I will try and track down.

Another option for you might be these Tomahawk Mufflers from Hardin Marine, which are by far one of the best mufflers on the market today, they are a full time muffler with limited power loss capability.

You can see video clip here

All times are GMT -5. The time now is 07:52 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page