Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Where to install an oil temp sensor? (https://www.offshoreonly.com/forums/general-q/208340-where-install-oil-temp-sensor.html)

minxguy 05-06-2009 07:53 PM
Where to install an oil temp sensor?
 
Have a '99 454 MPI with the upside down mount oil filter and I would like to install a oil temp gauge, (have a hole to fill on the dash) and other than doing the oil pan thing, where can I install a sensor just to get some sort of oil temp and get the gauge's needle to move?

Ken

DareDevil 05-06-2009 08:09 PM
Originally Posted by minxguy (Post 2860574)
Have a '99 454 MPI with the upside down mount oil filter and I would like to install a oil temp gauge, (have a hole to fill on the dash) and other than doing the oil pan thing, where can I install a sensor just to get some sort of oil temp and get the gauge's needle to move?

Ken
Either at the block ,,or at the oil filter housing !!


All times are GMT -5. The time now is 10:32 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.